Baltic Manufacturing Group, SIA
Diklu iela 9
Riga, LV-1002
Latvia

Office: +371 2781 9339
Cell: +372 2922 8078

Email: info@balticmfg.lv


Laser/GPS machine control

„We Make The Earth Move”

IMPROVE DRAINAGE ♦  INCREASE CROP YIELDS
REDUCE IRRIGATION COSTS ♦ REDUCE FERTILIZER COSTS

Existing field

Leveled field

Fields with wet closed depressions, dry high areas have uneven soil moisture that causes:

  • Reduced crop yield due to excess water in low  areas
  • Reduced crop yield due to insufficient water in high areas
  • Increased water consumption in attempt to cover all areas
  • Inefficient application of water-run chemicals
  • Increased soil erosion

Fields may appear “level” until water reveals the high and low areas.



Laser Land Leveling
Laser beam acts as a 650 m land plane





Laser receiver controls
the scraper to the laser reference


Survey and design
a cut and fill map


Use the tractor and scraper with laser machine control for precision land leveling – scrape down the highs and fill in the lows.



GPS Land Forming

GPS increase efficiency and productivity compared to Laser Land leveling!

  • 4 km range, 2000 Ha with one set up
  • Decrease the yardage to be moved with accurately calculated best-fit design
  • Just push the power button and start moving dirt!
  • No cables to break or set-up
  • No moving heavy laser towers
  • No calibration or warm up needed
  • No adjusting slopes trying to get the grade to match

GPS offers far greater capabilities than Lasers, yet GPS is simpler to setup and operate.

Increase productivity 20% or more vs. traditional laser leveling

 

IMC Scrapers is an authorized distributor for TOPCON water management products including GPS & laser systems for all types of scrapers. Contact IMC Scrapers EAME with your inquiries and for more information viktors@imcscrapers.com



TOPCON LASER MACHINE CONTROL SYSTEMS:

Single System
Laser Receiver setup

Dual System
Laser Receiver setup 

 

 

Laser Transmitter – RT5SW

 

 

TOPCON Laser Machine Control System brochure downloads:

 

TOPCON GPS Machine Control Systems

With AGForm-3D Office Software you can view the existing ground and designs using contour views or the 3D graphical view. AGForm-3D will design the field section as a best-fit plane, single slope, or dual slope plane. Or, significantly reduce the earthwork volume by breaking the field into multiple sections. With multiple sections, haul distances are shortened as well as top soil cuts being minimized.

TOPCON GPS Machine Control System brochure downloads:

 

“WE MAKE THE EARTH MOVE”